1. Clean surface to remove any
dirt or dust before applying decal.
2. Carefully peel off the bottom corner of the clear transfer tape while
holding down the white backing.
3. Gently apply the clear transfer tape (with decal still attached) to the
desired location with a credit card or other straight edge with a slow,
sweeping motion. Start from one edge or corner and work toward the opposite
side to avoid creases or bubbles.
4. Slowly peel back the clear transfer tape at a 45-degree angle; the vinyl
decal material should adhere to the application surface. If the decal starts to
pull with the clear transfer tape, carefully lay it back down on the surface
and use a straight edge to apply pressure to the edges